Automatic plant watering system with moss pole
Model details
This object is an automatic plant watering system designed to be attached to a tree trunk or stake, functioning as a moss pole. It features a two-tiered green plastic reservoir at the top, with visible water levels and a dispenser that drips water down into a lower section. This lower section is a perforated, honeycomb-patterned plastic cylinder filled with a brown, granular material, likely moss or substrate. The system is shown integrated with a plant that has large, green and white variegated leaves, wrapping around the watering device and the tree trunk it is mounted on. The image provides a clear view of the front and sides of the watering system, but the back and bottom are not visible. The plant's foliage partially obscures some parts of the watering system.
Use a similarly clear source photo to get a similar result. Try the photo to 3D model generator →
Automatic plant watering system with moss pole
Model details
This object is an automatic plant watering system designed to be attached to a tree trunk or stake, functioning as a moss pole. It features a two-tiered green plastic reservoir at the top, with visible water levels and a dispenser that drips water down into a lower section. This lower section is a perforated, honeycomb-patterned plastic cylinder filled with a brown, granular material, likely moss or substrate. The system is shown integrated with a plant that has large, green and white variegated leaves, wrapping around the watering device and the tree trunk it is mounted on. The image provides a clear view of the front and sides of the watering system, but the back and bottom are not visible. The plant's foliage partially obscures some parts of the watering system.
Use a similarly clear source photo to get a similar result. Try the photo to 3D model generator →
